Description:

36-PIECE PUNCH & CHISEL DISPLAY WITH 12 SKUs | 3 Each

CC1232 3/8″ COLD CHISEL
CC1632 1/2″ COLD CHISEL
CC2432 3/4″ COLD CHISEL
PC1232 3/8″ CENTER PUNCH
PLT 632 3/16″ LONG TAPER PUNCH
PLT 732 7/32″ LONG TAPER PUNCH
PP 332 3/32″ PIN PUNCH
PP 432 1/8″ PIN PUNCH
PP 532 5/32″ PIN PUNCH
PP 632 3/16″ PIN PUNCH
PS 432 1/8″ SOLID PUNCH
PS1032 5/16″ SOLID PUNCH

All Wilde punches and chisels are forged from high-carbon molybdenum tool steel and individually heat-treated to make them the toughest striking tools on the market.  Wilde punches and chisels are hardened the entire length with a tempered striking end.
Chisel cutting edges are sharpened and re-sharpened to give the keenest points available.  Pin Punches have a reverse taper point which eliminates the punch from sticking in the work-place.
Chisels are designed to be re-sharpened once they become dull.  Care should be taken that excessive heat is not obtained when re-sharpening.  If the grinding temperature is not controlled, the hardness can be taken out of the immediate area.  More importantly, a hard, brittle surface can be set which is very susceptible to fracture.
Always wear safety goggles when using punches and chisels.