K36 | 36-Piece Punch & Chisel Set in plastic molded case.
Order #K36
MFG# K36.NP/DR
K 36 Includes 1 of Each
| MFG # | DESCRIPTION |
| CC 832 | 1/4″ x 4-3/4″ COLD CHISEL |
| CC1232 | 3/8″ x 5-1/4″ COLD CHISEL |
| CC1632 | 1/2″ x 6″ COLD CHISEL |
| CC2432 | 3/4″ x 7″ COLD CHISEL |
| CCL2432 | 3/4″x 12″ LONG COLD CHISEL |
| CD 632 | 3/16″ x 5″ DIAMOND POINT CHISEL |
| CP 832 | 1/4″ x 5-1/2″ CAPE CHISEL |
| CR 832 | 1/4″ x 5-1/2″ ROUND NOSE CHISEL |
| PC 832 | 1/4″ x 4-1/4″ CENTER PUNCH |
| PC1632 | 1/2″ x 6″ CENTER PUNCH |
| PLT 632 | 3/16″ x 9″ LONG TAPER PUNCH |
| PLT 832 | 1/4″ x 11″ LONG TAPER PUNCH |
| PLT1032 | 5/16″ x 11″ LONG TAPER PUNCH |
| PP 232 | 1/16″ x 4-1/4″ PIN PUNCH |
| PP 332 | 3/32″ x 4-3/4″ PIN PUNCH |
| PP 432 | 1/8″ x 5″ PIN PUNCH |
| PP 532 | 5/32″ x 5-1/4″ PIN PUNCH |
| PP 564 | 5/64″ x 4-1/2″ PIN PUNCH |
| PP 632 | 3/16″ x 5-1/2″ PIN PUNCH |
| PP 832 | 1/4″ x 7″ PIN PUNCH |
| PP1232 | 3/8″ x 7″ PIN PUNCH |
| PPL 632 | 3/16″ x 9″ LONG PIN PUNCH |
| PPL1032 | 5/16″ x 9″ LONG PIN PUNCH |
| PR 832 | 1/4″ x 4-1/4″ PRICK PUNCH |
| PS 232 | 1/16″ x 4-1/2″ SOLID PUNCH |
| PS 432 | 1/8″ x 4-1/2″ SOLID PUNCH |
| PS 832 | 1/4″ x 6″ SOLID PUNCH |
| PS1032 | 5/16″ x 7″ SOLID PUNCH |
| RS 232 | 1/16″ x 4-1/2″ ROLL SPRING PUNCH |
| RS 332 | 3/32″ x 5″ ROLL SPRING PUNCH |
| RS 432 | 1/8″ x 5-1/2″ ROLL SPRING PUNCH |
| RS 532 | 5/32″ x 6-1/4″ ROLL SPRING PUNCH |
| RS 564 | 5/64″ x 4-3/4″ ROLL SPRING PUNCH |
| RS 832 | 1/4″ x 7-1/4″ ROLL SPRING PUNCH |
| RS1232 | 3/8″ x 8″ ROLL SPRING PUNCH |
| RS1632 | 1/2″ x 9-1/4″ ROLL SPRING PUNCH |
All Wilde punches and chisels are forged from high-carbon molybdenum tool steel and individually heat-treated to make them the toughest striking tools on the market. Wilde punches and chisels are hardened the entire length with a tempered striking end.
Chisel cutting edges are sharpened and re-sharpened to give the keenest points available. Pin Punches have a reverse taper point which eliminates the punch from sticking in the work-place.
Chisels are designed to be re-sharpened once they become dull. Care should be taken that excessive heat is not obtained when re-sharpening. If the grinding temperature is not controlled, the hardness can be taken out of the immediate area. More importantly, a hard, brittle surface can be set which is very susceptible to fracture.
Only wholesale customers are able to make purchases.
Login to see prices
Only wholesale customers are able to make purchases.
Login to see prices
Only wholesale customers are able to make purchases.
Login to see pricesS&R Supply, Inc. was founded in 2013 to provide specialty products to Hardware, Co-Op, and Automotive stores. Our mission is to help our customers provide quality and unique products to the communities they serve.
